Today I spent a short while on the project. Attached the power stroke shocks and checked the ride height. Set up the FS-GT3B and bound it to the...
Short answer: No. It will most likely contain black and white or black and yellow. I'm open to suggestions.
Your Fleet link took about 8 sec. to display on my antique box. the others were about 2 sec. My ISP is ADSL through Century Link. Interestingly,...
I've posted the best pics on Google+ https://plus.google.com/u/0/?hl=en&tab=wX#photos/116007013176187285757/albums/5663905929527885713
With the center drive installed, I can now install the top plate. I had already mounted the stock 2075 servo (have to work with what I have) and...
To work around a parts availability problem, I swapped out the center diff from the bug-slash 4x4. This is where this Fast Lane Machines aluminum...
A few posts ago, I was moaning about the stock servo saver. Well, here's my $30 cure from STRC.
RPM showed us how to do this next part.
Yesterday I cut the Flo-Tek body from the mold. Today, I fit it to the chassis. I changed the mounts from stock to RPM's. the RPM's are just a...
Hi Tyson, Welcome to the party! looking forward to your youtube links.
IeSpell check is just what I needed. Thanks wOOd for the tip.
I've got all my eggs in the 1/10 SCT basket. I did see a Slash 4x4 with a 1/8 scale on road body that looked awesome. And we all know what speeds...
The diff case does not hold oil. But it does contain some grease for the ring and pinion gears. On the stock Slash 4x4 there is a bulk head that...
I decided that I didn't like the way the silicone gasket fit munder the trailing edge of the front diff housing. So I fabricated a filet form some...
That sound track is unmistakable David Gilmore.
I believe it's 1/8" thick. Tomorrow I'll get the specifics. It got a little too cool in the garage, so I had to quit for today. It's actually...
Quick update and status report. This picture is just a mock up of the center driveline and rear clip. Yesterday I ran into difficulty with the...
Thanks for the info, guys. I've got a whole lot of learning to do.
Here it is! I learn something new every day. Thanks wOOd.
Here's a newb question. Can a single receiver be bound to two different transmitters at the same time? I have the stock traxxas 2.4 ghz...
Separate names with a comma.
