Paparazzi Apogee is new generation of Paparazzi Autopilot

GPS · Sep 23, 2013

This stuff just keeps getting better and better.

STMicroelectronics STM32F405RGT6 Cortex M4 168MHz processor featuring a Floating point unit (FPU), up to 192k of RAM and 1024k of FLASH.

9(6) DOF integrated IMU MPU-9150(6050) based

1 x Barometer/altimeter MPL3115A2 (I2C, MPU slave capability)

1 x MicroSD card slot, 4 bit SDIO interface (high speed data logging)

1 x USB : DFU mode (download) or USB storage (direct access to MicroSD card)

6 x Servo PWM outputs

1 x R/C receiver PPM frame input

1 x R/C receiver serial input with inverter (Futaba S.BUS, Spektrum, etc.)

3 x UART

2 x I2C bus

1 x SPI bus

RTC with backup capacitor

SWD(ARM download/debug interface)

4 x Auxiliary I/O (General Purpose and/or ADC and/or servo PWM)

5v / 1.5A switching power supply (input voltage range 5.5V min → 17.0v max)

3.3v / 1A linear regulator

1 x 5v / 500mA power switch

4 x status LEDs

10.4 grams (0.37 oz)

53 x 25mm (2.1" x 0.98"), shares the same external dimensions and mounting points as UmarimLite

4 layers PCB design

Click to expand...

Read more and see photos via the source link.

Source:
http://paparazzi.enac.fr/wiki/Apogee/v1.00

Available here:
http://www.droneasy.com/index.php/electronics/flight-controllers-2/paparazzi-apogee.html

Log in or Sign up

Paparazzi Apogee is new generation of Paparazzi Autopilot

GPS Registered

Share This Page

Log in or Sign up

Paparazzi Apogee is new generation of Paparazzi Autopilot

GPS Registered

Share This Page

Useful Searches