Novak: Crusher/4PHD 4-Pole 4X4 SCT BL System- 4600Kv [NEW!]

GPS · May 22, 2014

Novak's 4-Pole 4x4 SCT System Has Arrived!
Searching for an all around 4-pole power plant? Novak has paired the updated Crusher speed control with the new Novak 4PHD 4600Kv 4-Pole sensor-based motor, making the perfect combo for heavy-duty 4X4 applications. Novak’s 4PHD motor provides massive power and torque. Heavy loads, hard throttle and tough conditions are handled with ease. Novak’s rugged, purely sensor-based Crusher ESC, with its new Simple Tuner™ interface, will provide crisp and smooth throttle response. With added features like complete on-board programming, sealed case, auto-detect LiPo cutoff, dynamic timing, ESC thermal protection, and a rebuildable motor, the Crusher/4PHD 4-Pole Brushless System is a great blend of performance and easy-to-use features that is ready to power your project today.

4-Pole Versus 2-PoleWhat is the difference between a 4-pole and a 2-pole motor? More magnetic poles on the rotor, and more coils in the stator mean the motor is suited for hard acceleration and heavier loads. While the 2-pole motors, such as the Ballistic 550, thrive in high-RPM ranges, 4-pole motors will be superior in the flat-out acceleration race and constant low-to-mid RPM pulls. 4-pole motors thrive in heavier rigs, and typically run better on smaller tracks with lots of short acceleration requirements. The 4PHD is not your standard 540-size 4-pole motor! It is slightly longer and packs an extra punch while remaining more compact than a 550-sized motor. It’s the best of both worlds!

Pure Sensor-Based System The Novak Crusher/4PHD 4-Pole 4X4 SCT Brushless System is a pure, sensor-based system for the ultimate in power delivery and smooth controlled driveability. There is no cogging, delays or hesitations due to ESC and motor communications. Throttle and braking responses are direct and precise. Response at any speed or throttle input happens immediately and allows the ESC to know precisely what the motor needs for the best performance. From fully stopped to throttle stabs and the light brake touches, Novak's pure sensor-based systems provide the best feel, response and performance of any brushless system.

On The Spot CustomizationNo external programming box or PC device is needed. The Crusher’s Simple Tuner™ onboard programming allows you to change your favorite settings using the ESC’s simple-to-follow, color-coded LEDs. Most drivers only have a few things they like to adjust. The popular settings are easy to remember and can be changed on the fly when needed. Customizable profiles allow you to completely change the feel and driving style with one master setting.

Dynamic Timing Advance™Ready for a little, or a lot of extra power? Novak’s race-proven Dynamic Timing Advance is included with a simple to use RPM range setting. This functionality allows you to give your motor up to 35 degrees of electronic timing advance that will increase RPM at full throttle! That's right, when you're in the wide-open spaces or on a race track, you can always use a bit more "braaap." That's exactly what Dynamic Timing Advance does. It gives you a kick in the pants to get you there sooner! The speed control uses electronic timing advance to increase the motor RPM under specific motor RPM and throttle conditions to provide extra top speed. You can select the RPM range the timing kicks in, and you can select how many degrees of dynamic timing are applied.

Equipped With X-Drive™ Novak X-Drive™ provides incredibly smooth throttle response while maintaining an extremely connected and controlled feel. This motor-firing technology has been taking the racing world by storm and is now included in the Crusher. No speed control is complete without Novak X-Drive™!

Heavy-Duty Motor The Novak 4PHD motor’s heavy-duty design is built for the demands of 4X4 SCT driving.

Complete coverage heat sink– the motor’s can is precision CNC machined with heat sinking to provide maximum cooling

Pre-wired with 12AWG– multi-colored and ready to install with quality gold-plated, quality copper bullet plugs

Mounting options– 2 pairs of standard 3mm mounting holes, and 1 pair of extra heavy-duty 4mm mounting holes

High RPM bearings– ABEC 5 high RPM bearings are installed and treated with Novak’s exclusive Speed Lube premium bearing oil to extend life and increase RPM

Keep the dirt out– rubber gaskets and a closed motor design will help keep the dust and dirt out of your motor

Heavy-duty shaft– ready for hard-core usage, the output shaft is 5mm

The Novak 4PHD is also completely serviceable and rebuildable. At the track, service and repairs are a snap and you will be back to turning laps right away. Replaceable sensor harness (available in several lengths), replaceable rotor, and replaceable bearings are available. You will be back into action in no time!

Versatile ESC
The Crusher is not just a feature packed go-fast machine, Novak’s Simple Tuner™ interface also allows the Crusher to operate with mod or spec motors, Novak brushless crawling motors, and larger 550-size and 4-pole motors. When used with Novak brushless Crawling motors, the Crusher’s rock crawling roots are unlocked. Novak crawling ESCs have the most powerful hold/hill brakes in the industry, and the Crusher features Power Brake settings that will hold even the heaviest crawlers on the steepest of inclines. When you are done scaling tough descents and need to get to the next obstacle or down the trail faster, the Crusher utilizes Novak’s Rock Boost™ for added RPM and top speed. The Crusher can also be used with standard 540-size motors for all 2S-4S 10th-scale applications including 2WD off-road and spec racing. With the Crusher’s 4 pre-loaded and customizable profiles, you can race your 4X4 Friday night, hook up a spec motor and race “blinky” mode on Saturday, and get out the crawling rig with a Novak brushless motor on Sunday for a weekend of R/C nirvana!

Novak Built and Supported
Novak takes pride in its facility in Lake Forest, California and also with its use of high-quality components and assembly and testing processes. Each Novak Crusher ESC and 4PHD 4-Pole Brushless Motor is tested in the Novak factory to Novak’s exacting standards. All Novak products are supported by Novak’s knowledgeable customer support staff and race team.
Click to expand...

Read more and see photos via the source link.

Source:
http://teamnovak.com/products/index.php?main_page=product_info&cPath=2_123&products_id=555

Log in or Sign up

Novak: Crusher/4PHD 4-Pole 4X4 SCT BL System- 4600Kv [NEW!]

GPS Registered

Share This Page

Log in or Sign up

Novak: Crusher/4PHD 4-Pole 4X4 SCT BL System- 4600Kv [NEW!]

GPS Registered

Share This Page

Useful Searches