2 different Tiny Whoops and 2 FPV Goggles BOTH RTF

I have a Frsky BeeCore Power Whoop (upgraded pigtail 2.0jst) brand new frame, Crazypony Insane (19000kv) probably about 30mins on them, AIO camera that the clover has been re-soldered a bunch you may want a new one (gets fuzzy). $120 8x HV lipos included

Turnigy 9x hydro dipped with Frsky DJT Module $55

FatShark Altitude V2s with fan face plate and NewBeeDrone harness. $170

iSDT Smart Charger with wall cable and 1s charger board for lipos. $40
8x HV 230mAh 1s lipos with 2.0 JST (included with powerwhoop)

This little whoop on a single charge can get up to 4 min flight times no problem. I always let motors cool between batteries.


I also have a Inductrix Tiny Whoop with brand new motors, fpv camera, and frame. I shorted the low voltage sensor so you can fly longer. Both batteries are older probably be best to get a new set. Along with that mod I used a bigger gauge wire to the micro jst connector for slightly better flight times and punch.

Included is a carbon fiber brace, 2 batteries, 1 usb charger, controller, red camera mount, and all of the cables for the Marvel FPV Goggles. Like to sell as Package for $150

You can text me at 503-929-8754 I am in Ashland